Ujwal Security And Automation Solutions

• Arm direction can be quickly interchanged
• Barrier gate up & down signal relay switch output
• R & G Traffic light relay switch signal output
• External loop detector signal anti-smashing interface
• Infrared sensor signal anti-smashing interface
• High sensitivity arm auto reverse function
• Parking system interface
• Motor working life 6 million times
• The cabinet is designed in European style, with high-end automobile painting technology

The CMP200 series offers brand-new automatic barrier gates equipped with telescopic boom arm that allows direction exchanging according to site application and a silvery housing with built-in LED indicating the state of the parking barrier, providing humanized user experience.
Its appearance and structure are designed based on the feedback and needs of the market and industry. Comparing with other barrier gates, the CMP200 series of automatic barrier gate products with telescopic straight boom might be an economic good fit meeting demands in different parking lots.
Features:
Better experience with auxiliary traffic lights in the main body 
Support anti-smash and automatic closing with an infrared detector, loop detector, radar detector 
Arm direction can be exchanged between leftward and rightward according to site application 
Opening and closing angle of 90° ±2°
Over voltage protection 
Support LPR, UHF reader controller and other devices for recognition and other A&C functions

• The fastest operating speed is 1.5s, and the speed can be adjusted according to different boom arm length 
• Reversible boom arm direction, compact and straightforward transmission mechanism, easy to install on-site
• Interactive chassis with LED indicator
• Digital control monitoring, delay automatic close, automatic test, rise/fall status display output 
• Automatically turning off settings; allowing manual raising of the gate arm; anti-smashing; equipped with fire protection linkage functions; highly secure 
• Users could adjust the position and the angle of rising/falling; there is a digital encoder automatically and accurately controlling the position 
• 24V backup battery, ensuring normal operation when power is unexpectedly disconnected 
• The chassis exterior uses a 2mm metal plate, electrophoresis, and powder coding 
• The gate arm will move to the original position when it detected something blocked it

Features:

The operation speed can be adjusted (1.5 to 6 sec).

Arm direction can be quickly interchanged from left to right.

Barrier gate up & down signal relay switch output.

R&G traffic light relay switch signal output.

External loop detector signal anti-smashing interface.

Infrared sensor signal anti-smashing interface.

Count mode interface.

Arm swing out function, when the vehicle hit the barrier gate, the arm can be swing out to avoid further damage on vehicle and machine core.

High-sensitivity arm auto reverse function (intensity can be adjusted).

RS485 communication interface.

The backup battery interface (optional).

Automatic arm lift function when power off (need to add power storage module).

• Housing Thickness: 2mm thickness for higher strength and reliability
• Smooth Operation: ABS brake control system for no bounce/jerk of boom at end positions
• Better Visibility: White aluminium boom bar with reflective strips and RAL 7012 powder coated housing 
• IP54 Protection: Control unit is IP – protected making it dust and water resistant 
• Optical Beam Sensor: Safety device to detect presence of vehicles and reverse barrier movement 
• Access Control Operation: Barrier operated through push button switch and can also be operated through access control system. 
• Manual Operation in case of Power Failure: Barrier can be raised or lowered by releasing the barrier lock. 

Simple structure with an Aluminum wave box Below -15 ℃ + temperature control capacitor Left and right movement adjustable. The gate movement adopts a crank rocker transmission mechanism which has a compact structure, enhanced rigidity, and convenient maintenance and operation. When the brake rod is in the horizontal or vertical state, the movement structure is completely self-locking, which can effectively protect the reducer from external force impact. Compared with ordinary gate movement, the parts are reduced by about 20% and the faults are less

• A boom barrier, also known as a boom gate, is a bar, or pole pivoted to allow the boom to block vehicular or pedestrian access through a controlled point. 
• Typically the tip of a boom gate rises in a vertical arc to a near vertical position.
• Boom gates are often counter weighted, so the pole is easily tipped. 
• Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions. 
• Some boom gates also have a second arm which hangs 300 to 400 mm below the upper arm when lowered, to increase approach visibility, and which hangs on links so it lies flat with the main boom as the barrier is raised.
• Some barriers also feature a pivot roughly half way, where as the barrier is raised, the outermost half remains horizontal, with the barrier resembling an upside-down L when raised.

• The fastest operating speed is 1.5s, the speed can be adjusted according to different boom arm length. 
• Digital control monitoring, support delay automatic close functions. 
• High safety, support power off manually rise boom arm, anti - smash functions.
• The position of the angle of rise / fall can be adjusted, and the digital encoder is adopted to limit the position automatically, replacing the traditional limit structure, and the position control is accurate. 
• The barrier boom will rebound when it is blocked. 
• Invertibility left and right direction, simple and compact transmission mechanism, easy to install on site.

• Can control by three position switch or by remote control unit, operate ‘Open’, ‘Close’ and ‘Stop’.
• Machine core with compression spring, effectively avoids the accidents caused by spring breaking.
• Motor cooling fan, solving the problem of heat-protection.
• Double safety limit switches (Optional)
• Auto close function.
• Manual Release
• Duty Cycle: intensive
• MCBF : 30 Lakhs
• Traffic Light interface (Optional)
• Wire control (switch signal) / Remote control (upto 25 m)
• Compatible with Weigand and RFID readers.
• Compatible with biometric
• Die-casting aluminum alloy motor, precision and good at thermal radiating
• Support the infrared photocell for anti-bumping function (optional)

• Adopt crank connecting rod mechanism driving, reduce the mechanical failure, low noise, no pollution, no need to maintain. 
• Remote control distance up to 10 - 20 meters, can control way of the brake switch form at any time, ensure the channel unimpeded 
• The balance of the special institutions, always cover up the vertical rod, rod level, and smooth, it can adjustment length according to the free brake rod.
• Remote control more convenient ,can open and stop at any time at special circumstances . 
• Can be an external manual control button line stops, on, off in case of power failure. 
• Support external vehicle detector, higher sensitivity and more stable.
• Service life of more than 3.5 million times, chassis adopts steel treated by a special process, the case of imported powder spraying, uv radiation, the sun is not easy to change color.